Size (length*width*height): 21cm x 15cm x 4cm

What's in the box:

1 Kg Tile Joint Grout Powder In Fine, Water Resistant, Compressible, Coloured Cement-Based Grout (1x)

Mosaic Floor Tile Reform Joint Grout Powder In Fine, Water Resistant, Compressible, Coloured Cement-Based Grout For Bathroom Toilet Living Room

Ezi GROUT FINE is a Combination of Binder, Filler, Special Additives and Pigments.

Features:-
Good Compostion And Good Performance Of Grout Tile Joint Powder.
Ezi GROUT FINE is a Fine Grade, Water Resistant, Compressible, Coloured Cementitious Grout (CG).
Floor Tile Reform , Refill Grout Fine Powder Form.
Contain 1Kg Grout Fine With Classification OfISO 13007-3 Class CG1.
Mixing Ratio 0.4 Litre Water For 1KG Fine Grout Powder.
Smooth And Easy To Applied Of Thin Creamy Paste Form After Mixture.
Applicable To Temperature From 5C to Normal Ambient Temperature.
Ezi GROUT FINE is a Combination of Binder, Filler, Special Additives and Pigments.

Special Features:-
Good Composition And Good Performance Of Groout Tiles Joint Refill Powder.
Refill and Reform Grouting NarrowTile-Joint Up to 5mm.
Usage for Grouting or Pointing Tiles Joints Between Ceramic Tiles, Natural Stones, and Mosaic Tiles.
Super Fine Powder With 100% Dry Solid Content After Refill And Reform On Tiles Joint.
Non Toxic Hazards And Inflamability For Environement And Human.
Conforming To Requirements Of MS ISO 13007-3, Classified As Type CG1.
Made In Malaysia Product With High Quality Performance.

Ezi Tiles Grout FineMixed WIth Clean WaterWill Have Quality Performance As Below:-
Good Compressive Strength.
Good Flexural Strength.
Good Abrasion Resistance.
Good Durability Of Grout Tiles After Grout Fine Dried Up.
High Shrinkage Resistance Grout Fine Refill Up
Aesthetic Appearance
User Friendly Of Grout Tile Fine
Good Workability
Water Resistant Properties
Minimised Efflorescenc

Application:-
Suitable For Wide Range Of Ceramic Tile, Glass Mosaic, Natural Stone Etc.
Suitable For Interior And Exterior Wall Or floor, Wet/Dry, Interior/Exterior Areas Including Swimming Pool And Water Immersion Area.

Installation Process Steps:-
1.Preparing The Joints
Allocate Correct Tile Joints (Recommended 2MMWide For Wall And 3MM Wide For Floor)ForTiles Installation.
Allow Adhesive Bed to Set For At Least 24 Hours Before Commencing Grouting.
Joints Must Be Dry and Free Of Contaminants (e.g. Dust, Grease, Laitance, Oil, Paint, etc.).

2.Preparing The Mix
Mix Ezi GROUT FINE with Recommended Mixing Ratio Until A Smooth And Uniform Coloured Paste Achieved. For Perfect Mixture, Mechanical Mixing is Recommended.
Note: Ensure Pigments Are Completely Dispersed During Mixing.

3.Finishing the Grout
Clean and Remove Excessive Grout Immediately By Using Damp Cloth or Sponge Before It Dries Out.
When The Grout is Sufficiently Firm, Polish Tile Surface With Clean Dry Cloth To Remove Grout Haze.
Ensure Minimum Grout Setting Time Of At Least 24 Hours.


#tiles#reform#refill#gap#tiles#tilejoint#groutfine#grout
Visit More On:
www.facebook.com/homewaremart