Size (length*width*height): 12cm x 12cm x 12cm
What's in the box:
QINGLONG QL-Roofing Waterproof Coating For Roof Leakage Repair (1x)
QINGLONG QL-Roofing Waterproof Coating For Roof Leakage Repair
QL-Roofing Waterproof Coating (Weather-Resistant And Decorative Type) Is A Single-component Water-Based Waterproof Coating. It Is Produced By Combining Acrylic Emulsion With Other Additives.
Features:-
Brand: QINGLONG
Roofing Waterproof Coating
Produced By Combining Acrylic Emulsion With Other Additives
Weather-Resistant
Decorative Type
Water-Based
Non-toxic
Odorless
Non-polluting
Environmental-Friendly
Special Features:-
Using Water As A Dispersion Medium; Non-toxic, Odorless, Non-polluting, It Is An Environmental-Friendly Product
Single Component, Cold Application, It Can Be Applied By Brushing, Rolling, Spraying, Scraping And Etc
Excellent Resistance To Aging, Elongation, Elasticity, Adhesion And Film Formation
The Waterproof Layer Is A Closed System With Overall Good Waterproof Effect, Especially Suitable For The Application Of Special-shaped Structural Base Layer
Can Be Used As A Colour Protective Layer For The Black Waterproof Layer Of Rubberized Asphalt To Achieve Beautifying Effect
Application Range:-
1. Suitable For Waterproofing And Heat Insulation Of Non-long-term Water-immersed Parts Such As Metal Roofing
2. Especially Suitable For Roof Waterproofing Of Light Shelling Structures. It Can Also Be Used As Adhesive Or Exterior Wall Decorative Coating
3. Suitable For Waterproofing And Decoration Of Old Roofs.
Application Method:-
1. Base Surface Preparation: The Base Surface Must Be Flat, Firm, Clean, No Water And Osmosis, Dents, Cracks And Leakage Must Be Fixed First, Internal And External
Corners To Be Made Round.
2. Coating:
A. Apply It With A Roller Or Brush
B. The Coating (Especially The Primer) Should Be Stirred Evenly When It Is Used;
C. The Coating Should Be Applied Evenly Without Precipitation;
D. Apply A New Coating On Top Of The Other When The Previous Layer Is Not Sticky To Hands.
E. Each Layer Must Be Coated According To The Specified Quality. It Should Not Be Too Thick Or Too Thin
F. Use The Non-woven Fabric To Strengthen Smaller Parts. After Applying The First Layer, Paste The Non-woven Fabric Without Water; Thereafter Apply The Second And
Third Layers.
3. Reference Consumption: 1.5~2.0mm Thick (1.5~2.0kg/m)
Zon | Berat | Kos Penghantaran (RM) |
---|---|---|
West Malaysia | Pertama 3.00 kg | 6.00 |
Tambahan 1.00 kg | 2.00 | |
East Malaysia | Pertama 0.50 kg | 14.30 |
Tambahan 0.50 kg | 5.10 |