Size (length*width*height): 25cm x 25cm x 18cm

What's in the box:

QINGLONG QL-Exterior Wall Transparent Waterproof Coating (1x)

QINGLONG QL-Exterior Wall Transparent Waterproof Coating For Outdoor Wall Waterproofing

QLExterior Wall Transparent Waterproof Coating Is A Flexible, Transparent And Colourless Polymer Product, Which IsProduced By Combining Special Polymer Emulsion, Styrene-butadiene Rubber Polymer Modifier, Surfactant And Plasticizer.

Features:-
Brand: QINGLONG
Exterior Wall Transparent Waterproof Coating
For Outdoor Wall Waterproofing
Transparent Coating
Colourless Polymer Product

Special Features:-
Colorless And Transparent, It Will Not Ruin The Original Decorative Effect After Coating; Not Easy To Turn Yellow Or Be Stained With Dust
Excellent Resistance To Heat, Ultraviolet Rays, Ozone, Acid And Alkali; Great Adaptation To Temperature
Excellent Film Formation, Soft And Tough
Using Water As A Dispersion Medium; Non-toxic, Harmless, Non-polluting, It Is An Environmental-friendly Product
Supporting Cold Application, It Is Easy To Use And Can Be Applied By Brushing, Rolling, Spraying, Scraping To The Walls, The Film-forming Has Microporous Permeability, Which Is Suitable For Thermal Evaporation In A Humid Climate In The South, And Wont Be Agitated
Low Dosage And Low Cost.

Application Range:-
1. Suitable For Waterproofing Repair Of Exterior Wall Leakage Of Various Buildings;
2. Suitable For Waterproofing Applied To The Interface Of Various Decorative Coating Materials;
3. Waterproof And Moisture-proof On The Surface Of Exterior Wall Decorative Materials.

Application Method:-
1. Use Detergent, Wire Brush And Cloth To Clean The Base Of The Wall As Much As Possible, But Try Not To Destroy The Original Surface Luster;
2. Paint The Transparent Waterproof Coating On The Wall With A Brush. The Joints Of Decorative Tiles Should Be Carefully Brushed, About 2-3 Times In General. When Brushing, Apply A New Coating On Top The Other When The Previous Layer No Longing Stick To Hands, And The Direction Of Brushing Should Be Crisscross-cutting.
3. In The Construction Process, If The Viscosity Is Too High, Water Can Be Added, But The Amount Of Water Should Be As Little As Possible;
4. Reference Consumption:0.1 ~ 0.2mm Thick (0.10.2kg/m)