Size (length*width*height): 23cm x 19cm x 13cm

What's in the box:

QINGLONG QL-C2 Concrete 2 Water-Based Polymers Waterproofing (1x)

QINGLONG QL-C2 Concrete 2 Water-Based Polymers Waterproofing For Water Leakage Wall, Ceiling Repair

QL-C2 Is Made Of Water-based Polymers, Curing Agent And A Variety Of Additives Which Comprises A Waterproof, Corrosion,Resistant, Environmental- Friendly Reinforcement Material With High Permeability. Qinglong Cement No. 2 Is A New Patented,Product Jointly Developed By Qinglong Company And Foreign Research Institutes.

Features:-
Brand: QINGLONG
Water-Based Polymers Waterproofing
For Water Leakage Wall, Ceiling Repair
Has Superior Resistance To Water, Acid And Alkali
Effectively Prevent Corrosion Of Reinforcing Steel Bars In Concretes
Environmental Friendly
No Pollution
Easy To Use
Can Be Applied With A Brush, Spray And Roller.

Special Features:-
It Can Cure Under Humid Conditions.
Cement No. 2 Has Superior Resistance To Water, Acid And Alkali. It Can Effectively Prevent Corrosion Of Reinforcing Steel Bars In Concretes.
It Has High Permeability And Can Quickly Seep Through Mortars Or Concretes To A Depth Of 3~5mm Via The Capillary Tracts, Forming A Compact Seal ThatEnhances The Impermeability Of The Concrete.
Strengthening, Toughening And Anti-corrosion. Spraying This Product Can Prevent The Concrete Surfaces From Dusting And The Concrete Strength Will Increase
By More Than 15%. In The Meantime, It Can Also Resist Most Corrosion Created By Acid And Alkali.
Wide Range Of Uses. It Can Be Used For Repair Of Fine Cracks In Concretes And Surface Treatment Of Different Materials.
Water-based Materials, It Is An Environmental-friendly Product, No Pollution, Easy To Use, Can Be Applied With A Brush, Spray And Roller.

Application Range:-
1. Waterproof Sealing And Reinforcement For Surfaces Of Concrete Building And Structures In Contact Or Not In Contact With Water.
2. Sealing, Anti-leakage And Reinforcement Of Cement Plaster Layer
3. It Is Especially Suitable For Repair Of Cracks In Concrete Structures, Reinforcement Of Loose Surface, And Seepage Control For Surfaces In Contact And Not In
Contact With Water
4. It Can Effectively Prevent The Corrosion Of Seawater On Concrete.
5. Can Be Used As Interface Treatment Agent.

Application Method:-
1. Cleaning Of Surface: Remove The Loose Parts, Clean The Surface Of The Concrete Structure, Ensure That It Is Free Of Dust, Oil And Water;
2. Mixing Materials: Mix A:b=10:1, Stir Thoroughly Until It Becomes Milky White;
3. The First Layer: Use A Brush To Evenly Spread The Mixture On The Clean Surface;
4. The Second Layer: After The First Layer Is Solidified For Half An Hour, Spread The Mixture On The Surface Evenly;
5. Proceed To The Next Step After 1 Hour Of Spreading.
Note: Dilute It With Water Using A Ratio Of 1:0.5 For Spraying.
(Recommended Consumption: About 0.2~0.5kg/m According To The Concrete Compactness, 0.25kg/m Under Normal Conditions)