Size (length*width*height): 21cm x 8cm x 5cm

What's in the box:

QINGLONG QL-C1 Concrete 1 Super-Permeable Crystallized Waterproofing (1x)

QINGLONG QL-C1 Concrete 1 Super-Permeable Crystallized Waterproofing For Water Leakage Wall, Ceiling Repair

QL-C1 Is A Super-Permeable Crystallized Waterproofing Agent Which Incorporates Nanoscale Inorganic Silicate For Concrete Curing,Repairing And Strengthening. It Is A New Patented Technology Product Developed By Qinglong Company For Water Seepage Control

Features:-
Brand: QINGLONG
Super-Permeable Crystallized Waterproofing
Leakage Repair On Ceiling And Wall
Water-based Inorganic Material
Colourless
Odourless
Non-toxic
Safe And Environmental-friendly

Special Features:-
It Is Especially Suitable For Slow Permeability Maintenance Of The Surfaces Not In Contact With Water. It Can Be Directly Sprayed On Wet Base Surfaces
It Has High Permeability And Is Modified To Improve The Strength, Compactness And Weathering Resistance Of Concrete
Permanent Crystallization Reaction With The Free Base In Concrete, No Rebound, Long-lasting And Effective
After Spraying Cement No.1 On The New Concrete, It Can Effectively Prevent Early Water Loss, Partial Drying And Cracking
It Is A Water-based Inorganic Material, Colourless, Odourless, Non-toxic, Safe And Environmental-friendly

Application Range:-
Waterproof And Seepage Treatment For Both Facing Water Face And Back Water Face Of All Kinds Of Concrete Buildings And Structures.
It Is Especially Suitable For Slow-seepage Treatment Of Surfaces Away From Water, Such As Basement, Tunnel, Pool And Other Anti-seepage Maintenance.

Application Method:-
Spraying Tips:-
1. Base Surface Cleaning: Ensure That The Base Surface Is Clean, Free Of Oil And Water, Cracks And Other Defects Can Be Repaired By Ql-fast Leakage Fix.
2. The First Spraying: You Can Apply Ql-c1 On The Concrete Surface Directly To Ensure That All Surfaces Are Evenly Sprayed.
3. The Second Spraying: When The First Spray Layer No Obvious Wet State, You Can Spray It Again.
4. Wet Treatment: When The Second Coating Surface Is Dry, Spray Water On It And Keep The Surface Moist For 24 Hours, Then Clean The White Precipitate On The
Surface . ( Recommended Consumption: The Usage Is About 0.2~0.5l/m According To The Concrete Compactness, 0.25l/m Under Normal Conditions).
(Recommended Consumption: About 0.2~0.5l/m2 According To The Concrete Compactness, 0.25l/m2 Under Normal Conditions)
Mixing Tips:-
1. Cleaning: Ensure That The Surface Is Clean, Free Of Oil And Water.
2. Mixing Mortar: (Cement: Sand: Cement No. 1: Water = 1:1 ~ 1.5: 0.03: 0.35 ~ 0.4) Mix It As Needed;
3. Spread The Mixed Mortar Evenly Over The Concrete Surface And Press It Tightly;
4. When Used For Cracks Repair, Chisel The Cracks Into A v Shape And Fill It With The Mixed Mortar.