Size (length*width*height): 3cm x 13cm x 26cm
What's in the box:
- 1 x Crimping tool
- 1x Cable cutter
A Crimping ToolIs ADevice Used To Conjoin Two Pieces Of Metal By Deforming One Or Both Of Them In A Way That Causes Them To Hold Each Other. The Result Of The Tool's Work Is Called A Crimp. A Good Example Of Crimping Is The Process Of Affixing AConnector To The End Of A Cable. For Instance, Network Cables And Phone Cables Are Created Using ACrimping Tool (Shown Below) To Join TheRJ-45AndRJ-11Connectors To The Both Ends Of Either Phone OrCAT5Cable. To Use This Crimping Tool, Each Wire Is First Placed Into The Connector. Once All The Wires Are In The Jack, The Connector With Wires Are Placed Into The Crimping Tool, And The Handles Are Squeezed Together. Crimping Punctures The Plastic ConnectorAnd Holds Each Of The Wires, Allowing For Data To Be Transmitted Through The Connector
| 区域 | 重量 | 运费 (RM) |
|---|---|---|
| West Malaysia | 首 1.00 kg | 9.50 |
| 额外 1.00 kg | 2.50 | |
| East Malaysia | 首 1.00 kg | 25.00 |
| 额外 1.00 kg | 25.00 | |
| ZONE 8 | 首 1.00 kg | 166.00 |
| 额外 0.50 kg | 75.00 | |
| ZONE 13 | 首 1.00 kg | 423.00 |
| 额外 0.50 kg | 139.00 | |
| ZONE 5 | 首 1.00 kg | 118.00 |
| 额外 0.50 kg | 60.00 | |
| ZONE 2 | 首 1.00 kg | 85.00 |
| 额外 0.50 kg | 33.00 | |
| ZONE 1 | 首 1.00 kg | 59.00 |
| 额外 0.50 kg | 17.00 | |
| ZONE 3 | 首 1.00 kg | 113.00 |
| 额外 0.50 kg | 92.00 | |
| ZONE 4 | 首 1.00 kg | 102.00 |
| 额外 0.50 kg | 28.00 | |
| ZONE 6 | 首 1.00 kg | 144.00 |
| 额外 0.50 kg | 49.00 | |
| ZONE 7 | 首 1.00 kg | 156.00 |
| 额外 0.50 kg | 70.00 | |
| ZONE 9 | 首 1.00 kg | 214.00 |
| 额外 0.50 kg | 49.00 | |
| ZONE 10 | 首 1.00 kg | 177.00 |
| 额外 0.50 kg | 70.00 | |
| ZONE 11 | 首 1.00 kg | 354.00 |
| 额外 0.50 kg | 97.00 | |
| ZONE 12 | 首 1.00 kg | 375.00 |
| 额外 0.50 kg | 134.00 |