What's in the box:

50Hz~100KHz-24 Frequency Points 2.4 Inch TFT Screen Handheld Portable Tool LCR Meter Digital Bridge Impedance Tester Multifunction Measuring Instrument Measure Resistance Ccapacitance Inductance (Standard)

The NJ series impedance tester adopts a high-performance processor and an ultra-low power consumption design. It is a portable product mainly used to measure the performance of the three basic components (resistance R, capacitance C, and inductance L). The product has a built-in large-capacity lithium-ion battery, which is small in size, light in weight and easy to carry. It is more convenient to use for outdoor and high-altitude special operations.

Features:
The test frequency range is wide, the frequency range: 50Hz~100kHz. The frequency can be set.
Small size, light weight, easy to carry, you can take it to anywhere you want.
Built-in battery, using 2000mAH polymer lithium battery, continuous working time exceeds 4 hours.
The resolution is high, and the measurement result is 6 significant figures.
With calibration function, accurate measurement, high cost performance.
The serial/parallel mode, level and internal resistance are optional.
Strong anti-power frequency interference, and the interference level prompts.
Automatic gear shift without manual intervention.

Specification:
Main material: metal
Color: black
Working frequency: 50Hz~100kHz
Display screen: 2.4 inch TFT resolution 320*240 (QVGA)
Battery: 1 * lithium battery, 2000mAh (included)
Power consumption: <1W> Charging current: 400mA
Charging interface: USB (only as a charging interface)
Automatic shut-down: always open, close immediately, 5 minutes to 60 minutes (optional)
Measurement parameters: Rs/Xs/Rp/Xp/Cs/Cp/Ls/Lp/Z/D/Q/?/Vrms/Irms
DC bias: no
Display resolution: 6 effective value
Measurement speed: fast, medium, slow
Measurement accuracy: less than 0.1% within the measurement range, out of range may be greater than 0.1%
Connector: BNC
Display range:
Z, R, X: 0.00001mO~9999999MO
C: 0.00001pF~9999999F
L: 0.00001nH~9999999H
D, Q: 0.001~99999
?(degree): -179.9~179.9
Vrms: 0.0001mV~999999mV
Irms: 0.0001nA~999999mA
Measuring range:
Z: 1mO~200MO
C: 3fF~3F
L: 0.5nH~600kH
Level:
mVrms: 1, 002, 003, 004, 005, 000, 000, 000, 000, 000, 000
Output impedance: 30O, 100O (optional)
Mode: automatic, series, parallel (optional)
DUT: automatic, resistance, inductance, capacitance, electrolysis (optional)
Calibration function: open circuit, short circuit (with factory value), load calibration
Operating temperature: 5?~40?
Atmospheric pressure: 860hPa~1060hPa
Item size: 130 * 108 * 31mm / 5.1 * 4.3 * 1.2in
Item weight: 315g / 11.1ounce
Package size: 185 * 130 * 115mm / 7.3 * 5.1 * 4.5in
Package weight: 477g / 1.1lb

Packing List:
1 * LCR Meter
1 * USB Cable