Size (length*width*height): 15cm x 15cm x 5cm

Product Description:

• Repair almost anything: stick bonds, seals, leaks and repairs, gouges in steel, aluminium, wood, fiberglass, concrete and ceramics.
• Use gloves if you find skin sensitivity
• For best results, clean and de-grease surfaces, then roughen bond area
• Twist or cut off required amount
• Smaller amounts of putty used and lower temperatures will lengthen hardening and cure times
• To mix, knead thoroughly with fingers to a uniform color
• (average mixing time is 2 minutes).
• A quick way to knead the putty is on a hard-clean surface.
• If tacky on hand, wet hand slightly.
• Apply to surface to be repaired (within two minutes of mixing).
• The mixed epoxy does not exhibit high bond strength at this point but appears to be merely lying on the surface
• Force into any cracks or holes to be filled and strike off excess material.
• On painted surface, the bond can only be as strong as the paint bond itself
• When applying to damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.
• For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening.
• Remove excess material before hardening begins.
• Once hardening begins, do not handle or reposition
• After 30-40 minutes the epoxy will harden and form a tenacious bond.
• After just 60 minutes many items are able to be put back into service.

Package Included:

• 3 Pcs x Mighty Putty
• 1 Pair x Gloves