Mapp Gas 3600F

Before use :

1. First shake the bottle gas
2. Check cylinder and torch seals. Never use with damage or missing seals. Discard cylinder if dirt or rust particles are in valve area.
3. Turn torch off.
4. Hold cylinder upright while attaching torch.
5. Attach outdoor away from pilot light flames sparks or other ignition sources. They can ignite leaking gas.
6. Hand tighten only. Never use tools to tighten . Over - tightening can damage seals.
7. Check for leaks. Put soapy water on connections, look for bubbles, listen for hiss of escaping gas, feel for extreme cold, smell for rotten egg odor. It means leaking. Do not use it.
8. Read and follow torch instructions.

During use :

1. Use upright to prevent flare-ups of flashes. Never drop or throw cylinder.
2. If torch sputters or flares up, turn cylinder upright and turn off torch. Vent area to remove unburned gas. Slowly turn on. After hearing slight hiss, relight.
3. After long times continuous burning the cylinder will ice up, the flame weakens and causes the spears head to blush. Please close the valve can continue to use after shaking.

After use :

1. Turn off torch let cool.
2. Detach torch when not in use.
3. Detach outdoor keep away from pilot lights, flames, sparks or other ignition sources. They can ignite leaking gas.
4. Replace cap to keep valve clean.