What's in the box:

3 in 1 TDS EC Water Quality Test Meter Temperature Digital Display for Drinking Water Aquariums Pool Spa (Standard)

3 in 1 TDS EC Water Quality Test Meter Temperature Digital Display for Drinking Water Aquariums Pool Spa

Description:
This is a digital TDS meter tester to test the filter water quality purity. To check the performance of your water filter, to check for hardness (1grain=17ppm), to make sure you always drink pure water. Saves measurements for convenient reading and recording new arrival.

Features:
With locking function, it is easy to read and record, and the instrument will lock the reading;
5 minutes auto off function, battery will not run
Water quality detection adopts large screen liquid crystal display, which is easy to read. Because of its advanced microprocessor technology, it is efficient and accurate.
Support automatic temperature compensation, water quality detection can switch between TDS and conductivity.
Automatic shutdown function: turn off the meter after 5 minutes without use, save battery.
Small size, but suitable for testing pH balance of drinking water, swimming pool, aquarium, reverse osmosis system, spa or hydroponics.
It can be used for water purifier and filter, food (vegetables, fruits) and beverage quality monitoring, swimming pool and hot spring, aquarium, hydroponics.

Specifications:
Measurement range:
Conductivity: 0-9990us / cm
TDS:0-9999ppm
Celsius: 0.1-80.0 ?
Fahrenheit: 32.0-176.0
Accuracy: 2%
Net weight: 55g
Size: 154 30 14 (mm)
Package Size: 15.5*3.5*2.5cm
Package Weight: 64g

Package List:
1 * Water Quality Test
1 * Leather Bag
1 * User Manual

Use steps
Before use, please pull off the electrode protective sleeve;
Press the on key and put the electrode into the solution to be tested;
After the value is stable, press the hold key to take out the reading;
After reading, press the on key, wipe the electrode clean and put the electrode protection sleeve in