Features:
The finished product can be washed directly by water with low viscosity and no pungent odor, no need to use alcohol any more.
With 76D high hardness, features high tenacity and impact resistance.
Fast printing speed, low shrinkage, smooth surface and high precision, perfect printing details.
Designed for most of LCD 3D printers, compatible with Anycubic, Nova, Sparkmaker, Uniz, Creality, etc.
Thickened aluminum bottle, not easy to sag, adding inner plug for leakage-free, blocking out the light completely, preserving the Resin in good condition.

Specifications:
Brand: eSUN
Type: LCD Washable Resin
Color: White / Black / Grey / Skin-Colored (optional)
Capacity: 500g / 17.6oz
Application: Compatible with Anycubic, Nova, Sparkmaker, Uniz, Creality, etc.

Recommended Print Parameters --
Print Layer Thickness:0.025-0.05mm
Bottom Layer Quantity: 8-16
Bottom Layer Exposure Time: 30s
Conventional Exposure Time: 6-10s

Technical Parameters --
Solidify Wavelength: 395nm to 405nm
Viscosity (25, MPa.s): 100 - 120MPa.s
Absorption Band: 395-410
Density (25, g/cm3): 1.05-1.25g/cm3

Parameters of Finished Product --
Flexural Modulus: 900-1400Mpa
Flexural Strength(25, MPa.s): 45-70MPa
Distortion Temperature: 70
Tensile Strength: 68MPa
Elongation at Break: 5%-10%
Hardness(D): 76D
Density: 1.08-1.13g/cm3
Impact Strength: 18-39j/m

Bottle Size: 7.4 * 18.5cm / 2.9 * 7.28in
Package Size: 20 * 10 * 10 cm / 7.87 * 3.94 * 3.94in
Package Weight: 616g / 21.73oz

Note:
1. The product is for one-time use and can not be reused.
2. Environmental requirement: It is recommended that ambient temperature be controlled at 20-30, to avoid direct light during use, try to isolate children and pregnant women.
3. Wear mask and gloves before use to avoid direct contact with the skin and keep the room ventilated, with caution for people who are allergic to acrylics, protective measures should be taken and thoroughly cleaned after operation.
4. Store under cool, shade and dry environment without direct light, recommended storage at room temperature.
5. Shake the resin for 1 to 2 minutes before use to prevent sedimentation.
6. Due to light, screen resolution and other factors, there will be some differences between the actual color and the picture display color of the finished products. Please understand. Thank you.

Package List:
1 * Bottle Resin Material