Size (length*width*height): 20cm x 20cm x 20cm

DESIGNED FOR ANY CREATIVE PROJECTS
Specifically designed for all your creative projects such as Jewellery, Tabletops, Paintings, Photography, Woodworking, Anything!This formula is formulated to offer the most efficient non-yellowing protection for (indoor). Non-toxic and safe for home use.
EASY MIX
Mixing ratio (2:1). High gloss, clear and durable finish, transparent and UV resistant which ensures long-lasting results.
DIY FRIENDLY
Perfect for any art and craft projects and surface application, excellent color stability to keep your works safe and glossy.
BUBBLE FREE
Fast drying and hard as rock if you ensure perfect amount ratio and stir thoroughly, evenly and slowly for 3-4 minutes.
SELF LEVELLING
To ensure better self-levelling, just complete the stirring in 3-4 minutes and pour slowly the resin into the moulds as soon as possible.
INTENSE SHINE
Top Quality protective clear coat that is guaranteed to withstand the test of time.
SAFE FOR HOME USE
Made with non-toxic ingredients and safe for indoors home use.
VERSATILE & MULTIPURPOSE
Use for wide variety of applications art & home projects.

4 EASY STEPS : TO APPLY DOLPHIN RESIN ART EPOXY
Easy mix 2 parts epoxy resin clear coat and hardener and stir for 3-4 minutes. Then just pour the liquid mixture over your project and spread. Leave it to dry for 24 hours and then love it forever!
STEP 1
MEASURE
Pour hardener (B) in slowly into resin (A). Pouring it all at once may caused the mixture to heat up and cure too quickly. Be sure to mix them equally for at least 60 seconds.
TIP If you use other mixing container, make sure it is clean of dust or water and always follow the mixing ratio of (2:1)
STEP 2
MIX
It leaves no bubbles if you stir evenly and slowly for at least 3-4 minutes. Scrape the sides and the bottom container to make sure the resin mix evenly (unmixed resin will leave you with sticky spots that just wont cure). Once you put the resin and hardener together, youll have about 30 minutes of working time before the resin thickens and cures.
STEP 3
POUR
After making sure your piece is level, go ahead and pour in Dolphin Resin Art Epoxy over your work. Itll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. Youll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them or torch it yourself for a flawless finish.
STEP 4
WAIT
Dolphin Resin Art Epoxy needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.

CLEAN UP To reuse your mixing tools, wipe them down with a paper towel before the resin dries.