Size (length*width*height): 100cm x 1cm x 25cm

100% Original branded !
100% Satisfaction Guarantee !
100% Buy with confidrfuence !
100% Brand new and in good condition.
ACT FAST ! READY STOCK

PRODUCT DETAILS

• MODEL : BS25D
• ENERGY SAVING : UP TO 80% LESS
• LONG LIFR : 5 YERAS
• RATED LIFE : UP TO 8000 HOURS
• Energy Saving Daylight Bulb - Emits Bright White, Soothing Light

WARNING:

• Do not cover the lamp with paper or fabric, or place it close to flammable objects while lit up.
• The heated bulb will pose a fire hazard.

CAUTION

• Do not drop the lamp, expose it to impact with hard objects, handle it with force, or scratch the surface. The broken bulb may cause injuries.
• When replacing the bulb, check the rating (voltage and wattage) and socket base design of the new bulb.
• Ensure the new bulb in positioned correctly and snap it firmly into the socket.
• A loosely fitted bulb may come out of the socket, or overheat.
• Do not touch the bulb with your bare hands and avoid direct contact with the skin while the lamp is lit up or just after turning it off.
• The hot bulb may cause burns.
• Before replacing the bulb, turn off the lamp, and let the bulb cool down
• The hot bulb may cause burns.
• After replacing the bulb, check to ensure no portion of the light fixtures or electric cord is touching the bulb.
• If this occurs, the heated fixtures or cord may cause a fire.
• Dispose of the used bulb on an as is basis.
• If the bulb is shattered, the broken pieces of glass may cause injuries.1
• Keep the bulb out of reach of infants and small children. They may swallow it.

NOTES IN USE AND DESIGN

• Double check the rating (voltage and wattage) of the lamp for applications other than in-vehicle use.
• Never paint the lamp.
• Avoid handling the lamp together with water or oil, or with dirty hands or contaminated gloves.
• Take sufficient consideration of the conditions of use when designing the lighting equipment.
• The performance will be significantly dependent on the operation status.
• Design the lighting equipment so that the components are not splashed with water, and free from condensation.