Size (length*width*height): 11cm x 2cm x 11cm

What's in the box:

1 xBosch Diamond Cutting Disc for Stone 105mm

Product details ofBosch Diamond Cutting Disc for Stone 105mm

Features:-
-For wet cutting, the electro-tool must be connected by means of an isolation transformer with a permanently installed socket without protective earth conductor
-To set up or to change disc, pull plug out.
-Use the correct cutting blade for the various material
-Clean flange, spindle and cutting blade
-Flanges should have at least 1/3 of cutting disc diameter
-Diameter of spindle, and bore hole of the cutting blade must be the same. Bore hole of the cutting blade must not be enlarged
-Arrow on the cutting blade and the direction of rotation of the machine msut be corresponding
-Maximum rotation of the machine must not be faster as the allowed rotation of the cutting blade
-Only work on right angle and on straight line. Curve cuts and edging may cause tears in the center or breaks of segments.
-Avoid harsh starts and tilting blade while cutting. Do not overstrain the cutting blade. Pausing occasionally for cooling is essential.
-When not in use remove disc
-To avoid damages, remove diamond blades from the machine during transit. Always war protective goggles, protective gloves, face mask, safety shoes and working clothes.
-Protection guard, cutting guide and dust extraction to be used whilst working
-Remove reduction ring for marble cutter application
-Use reduction ring for angle grinder application
-Only dry cutting for angle grinder application
-Long lifetime in all stone cutting
-Suitable for wet cutting in extremely hard stone when using a marble cutter