Size (length*width*height): 11cm x 2cm x 11cm

What's in the box:

1 xBosch Diamond Cutting Disc for Ceramic105mm

Product details ofBosch Diamond Cutting Disc for Ceramic105mm

Features:-
-Bosch is a leading manufacturer of accessories for power tools and is an innovation leader with 125 years of tradition. Bosch's aim is to develop innovative accessories for all applications, for more efficient working and for new materials. With more than 8000 products, Bosch offers the appropriate accessories for virtually all applications, users and all brands of power tools.
-Diamond Eco Ceramic materials for ceramics.
-Suitable for cutting materials
-Good quality
-Eco for ceramic - ceramic tiles, glazed tiles, for clean cutting edge.
Innovative cutting technology. Boschs new innovative Ceramic Turbo Disc ensures swift cutting speed with chip free edges, allowing users to optimise their cutting speed and efficiency.
-The right disc for the highest demands with regard to accurate, chip-free cuts with considerably less risk of tile breakage
-The thin cutting rim can lead to high accurate cutting
-Extra clean cutting quality without broken edges, long lifetime in all tiles
-Safety product according to EN norm 13236
-For clean cut edges in ceramic tiles. The low-cost solution for all-round use in tiles.
-To set up or to change disc, pull plug out.
-Use the correct cutting blade for the various material
-Clean flange, spindle and cutting blade
-Flanges should have at least 1/3 of cutting disc diameter
-Diameter of spindle, and bore hole of the cutting blade must be the same. Bore hole of the cutting blade must not be enlarged
-Arrow on the cutting blade and the direction of rotation of the machine msut be corresponding
-Maximum rotation of the machine must not be faster as the allowed rotation of the cutting blade
-Only work on right angle and on straight line. Curve cuts and edging may cause tears in the center or breaks of segments.
-Avoid harsh starts and tilting blade while cutting. Do not overstrain the cutting blade. Pausing occasionally for cooling is essential.
-When not in use remove disc
-To avoid damages, remove diamond blades from the machine during transit. Always war protective goggles, protective gloves, face mask, safety shoes and working clothes.
-Protection guard, cutting guide and dust extraction to be used whilst working
-Remove reduction ring for marble cutter application
-Use reduction ring for angle grinder application
-Only dry cutting for angle grinder application