What's in the box:

V1.3 3D Printer Motherboard Control Board with 12864 LCD Display Screen Module ()

Features:

• Using 32bit 100M Cortex-M3 MCU-LPC1768, and highly improve its performance.
• Support network function and highly modular open source firmware, easy for secondary development.
• Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
• Using high quality 4 layers PCB and special design for heat dissipation.
• Can connect with TFT32 display screen and TFT28 touch screen.

Specifications:

• Name: V1.3 + 12864 LCD Display Screen
• Support: 12V-24V DC Input
• SOP Package: Yes
• Motherboard Size: 14.7 * 9.5 * 2.2cm / 5.8 * 3.7 * 0.9in
• Motherboard Weight: 115g / 4.1oz
• Package Size: 25.7 * 15.5 * 4cm / 10.1 * 6.1 * 1.6in
• Package Weight: 317g / 11.2oz

Note:
1. Please make sure that correct Plus-n-Minus connection before power on.
2. Please do not plug/pull the motor during the application of electric field.
3. The correct procedure is to disconnect the power, unplug the motor, and then re-power, adjust the potentiometer, measuring the voltage on the potentiometer, until the measured voltage is the same as expected.
4. At present, V1.3 can only use TFT series and LCD12864 display screen, cannot use 2004, OLED display screen.

Packing List:

• 1 * V1.3 Control Board
• 1 * 12864 LCD Display Screen
• 1 * L Type Adapter
• 1 * Rotary Knob
• 1 * USB Cable
• 2 * Gray Wire