Size (length*width*height): 10cm x 10cm x 10cm

The Beiter Rest for recurve is the first Arrow Rest designed by Werner Beiter to be sold on the archery market.
Years of testing, many prototypes, hundreds of High Speed Films have helped to develop this first Beiter arrow rest for Recurve.

Rest Features:

• • The Beiter Rest for Recurve is designed to work for both Left- and Right-handed archers! No need for separate LH or RH models.
  • With the Beiter Rest for Recurve an archer can change e.g. from Aluminum to Carbon Arrows in only a few seconds!
  • The Beiter Rest for Recurve makes no noise (according to Beiter's test archers!)
  • The Beiter Rest consists out of 3 parts, manufactured from the highest quality plastic, and is easily applied on the inside of the bow window.

What do you get?:

• • Beiter Rest, (1 Support #1 with Glue Strip mounted with 1 Spindle, 1 Finger)
  • 1 Extra Finger
  • 1 Extra Spindle
  • 1 Beiter Rest Tool
  • 1 Extra Glue Strip
  • Instructions and Installation Guide
  • Boxed in a 30mm x120mm Twist-Box

Support:

The Support incorporates a revolutionary guiding System for the Finger, which may change position, carried by a specifically designed Spindle.
Due to the Support being applied with a specific angle (max ca. 15), the Arrow Position versus the Plunger and the Nocking Point may be determined and changed very quickly and more precise than with any other Rest on the market!
A Scale offers the opportunity to re-position the Finger after tests or changes.

3 Supports are available, differing in their thickness, to have the desired arrow position on bows with different cut-outs: #S1, #S2 (= #S1 + 1mm), #S3 (= S#1 + 2mm).

Finger:

• There are three types of Finger:
  • 15-12-0,65 for arrows with diameter 5.2 +/-1 (10/64-14/64)
  • 16-17-0,65 for arrows with diameter 7.8 +/-1 (15/64-19/64)
  • 17-23-0,77 for arrows with diameter 9.3 +/-1 (20/64-24/64)