BRAND NEW TOOLS PRODUCT

We offer great quality products in the following categories

[+] Home & Living [+] Tools & Home Improvement

PRODUCT NAME: Adjustable Temperature Electric Soldering Iron 220v 60w Soldering Solder Rework Station Heating Tip Repair Tool

This product comes with the following options with different/similar pricing (excluding shipping). Please choose your option carefully before buying. The main picture of this listing could refer to different option.

[+] CHOOSE / PILIH COLOR OPTION #1: 60W,220V EU Plug



[+] CHOOSE / PILIH COLOR OPTION #2: 60W, US Plug



[+] CHOOSE / PILIH COLOR OPTION #3: 60W Set,220V EU Plug



[+] CHOOSE / PILIH COLOR OPTION #4: 60W Set, US Plug




This compact desgined station is ideal for professional use. Soldering can be performed and adjusted from the control knob from 200 C - 450 C. Interchangeable iron plated tips are available to make the soldering station excellent for electronic and electric use.

This professional soldering tool is great for lead-free soldering semiconductors with adjustable temperature controlled soldering irons: 200-450 C.

Soldering Iron Length: cm
Cable Length / Panjang Kabel: 143 cm
Working Voltage: 220V 50HZ
Power: 60W
Instruction:

Press the (+) button once to increase 1; press and hold it to increase temperature continuously. Press the (-) button once to reduce 1; press and hold it to reduce temperature continuously. The newly set temperature will be saved after 3 seconds,and will keep the temperature for next time powering-on.When () or () symbol flashes, it means the heating core has not reached the set temperature.

Temperature Calibration:

1.After 60 seconds of power on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good touch.

2.When thermometer displays a stable temperature (about 2 seconds), write down the temperature.

3.Move soldering iron away from thermometer; press the (-) and (+) button at the same time to enter temperature Calibration.

4.Input adjustment quantity. Adjustment quantity=set temperature - measured temperature (see example)

5.Press the (-) and (+) at the same time to exit temperature interface, finished. Example 1, when setting temperature is 350 while measured temperature is 342, the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the (inches)+(inches) button till the LCD displays 8 c.press the (-) and (+) at the same time to exit temperature correction interface Example 2, when setting temperature is 350 while measured temperature is 330,the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the (-) button till the LCD displays -20 c.press the (-) and (+) at the same time to exit temperature correction interface
Failure warning indication

The LCD shows (OP): the heating element is open circuit.

Solution:

1.change the element.

2.To confirm that whether the pin of element is oxidized.

The LCD shows(E1):


Solution:

1.Unplug the soldering iron.

2.Close the interfering source.

3.To use it far away from the interfering source. Additional Info / Maklumat Tambahan: Please do not touch the soldering tip and tube when the power is turned on.