Form Factor: 2.5-inch internal SSD

Interface: SATA 6.0Gb/s

Total Capacity: 240GB*

Warranty: Limited 3-years

Sequential Read speed : up to 500 MB/s**

Sequential Write speed : up to 420 MB/s**

TRIM & S.M.A.R.T supported

* Note: 1GB = 1 billion bytes. Actual useable capacity may vary.

** Speeds based on internal testing. Actual performance may vary.

SPECIFICATIONS

Interface - SATA 6.0Gb/s

Form Factor - 2.5-inch internal SSD

Total Capacity - 240GB

Warranty - Limited 3-year or 100TBW

NAND - NAND Flash

External DDR Cache - N/A

Sequential Read speed - Up to 500 MB/s

Sequential Write speed - Up to 420 MB/s

Random Read IOPS - up to 50k

Random Write IOPS - up to 75k

Dimension (W x H x L) - 69.85 x 7 x 100 mm

Mean time between failure (MTBF) - 2M hours

Power Consumption (Active) - Average: R : 2240mW; W : 2610mW

Power Consumption (Idle) - 170mW

Temperature (Operating) - 0°C to 70°C

Temperature (Storage) - -40°C to 85°C

Note

* Test system configuration: configuration may vary by models, we will choose the latest platform for verification.

* Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark v.5.1.2 and I0meter 1.1.0. 

* Speeds based on internal testing. Actual performance may vary.

* TBW (Terabyte Written):Terabytes Written" is the total amount of data that can be written into an SSD before it is likely to fail.

* 1GB = 1 billion bytes. Actual useable capacity may vary.

* 3 years or 100 TBW, whichever comes first.

* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.

* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.

* All trademarks and logos are the properties of their respective holders.

* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.