Air compressor Filter

Air compressor filter is used to filter out water and oil from compressor, to keep output air pure and clean. It is recommended to paint spraying purpose to prevent impurity material mix with paint.

Maintenance notice:

1. Be sure to check up the components before used.
2. Please pay attention to the direction of flow and keep product vertical when installing.
3. The flow rate will reduce about 10% when connected with smaller pipe and will reduce about 7% for each level of filtration increased.
4. For the component with shield, be sure to fix the shield before use.
5. For the regulator, firstly to adjust the adjustment handle to zero, then fix the pressure gauge and fitting at the corresponding place and to ensure no leakage (the fitting places of the gauge and block fitting could be exchanged) and the adjust the pressure to needed level.
6. For the lubricator, firstly adjust the oil volume needle to zero, then add oil to oil volume level and then adjust the oil volume needle to certain level.
7. Please clean up the metal grain, dust and oil stain in pipes when connected with metal pipes.

Specifications:

• Model: TF2000-02
• Insured Max Pressure: 217.55 psi (1.5 MPa)
• Max Working Pressure: 145 psi (1.0 MPa)
• Environment & Liquid Temprerature: 0-60 °C
• Filtration: 5 μm
• Recommeded Lubricating Oil: ISOVG32
• Material Of Bowl: Polycarbonete (PC)
• Range of pressure: 7.25-123.28 psi (0.05~0.85 MPa)
• Type of Valve: Relief Type
• Inlet & Outlet size: 1/4"

Related Product:

• Puma Airbrush Compressor with Double Action Airbrush & Filter Set