What's in the box:
WELCOME TO OUR BRAND NEW AND ORIGINAL PRINTERS & PROJECTORS PRODUCT
We offer great quality products in the following categories
PRODUCT NAME: Super Silent MKS TMC2100 Stepper Motor Driver Module Mute Drive with Heat Sink for 3D Printer
This product comes with the following option.
OPTION #1: Blue
Super Silent MKS TMC2100 Stepper Motor Driver Module Mute Drive with Heat Sink for 3D Printer Parts
Features / Ciri-ciri Utama:
Adopts the most advanced chip to improve the function of the stepper which also makes the stepper work silently.
Comes with a heat sink to greatly improve the heat dissipation.
Drive current algorithm: i=Vref * 1.9/2.5, the default Vref about 0.65v, so the default current 0.5A, the maximum current 1A.
Vref measurement of Gnd and potentiometer intermediate voltage.
Use of the TMC2100 drive module:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Please pay attention to direction.
3. The heat sink directly attached to the PCB.
4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988. And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.
Specifications / Spesifikasi Produk:
Material / Dibuat Daripada: Metal
Type: MKS TMC2100 Stepper Motor Driver
Item Size / Saiz Produk: 2 * 1.5 * 1cm/ 0.8 * 0.6 * 0.4in
Item Weight: 2g/ 0.05oz
Additional Info / Maklumat Tambahan:
1. Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
2.The measurement of the voltage should be switched on. Don't just connect the USB power supply.
3. Please pay attention to the direction, do not insert reversely.
4. The working temperature might be high without fan. The working temperature is about 70 C when working current is around 0.5A, and over 150 C when working current is around 1A , which may cause losing step. In order to let the stepper work better, please keep the working current around 0.5A.
Package List / Kandungan Pakej:
1 * TMC2100 Stepper Module
1 * Heat Sink with Sticker
1 * Screw Driver
[+] We guarantee that this printers & projectors product is ORIGINAL or your full money back.
[+] This product comes with a warranty, subject to terms and conditions.
[+] We shall ship out typically within 4-24 hours, if there are no other unforseen problems with your address info or stocks.
[+] Our supplies are from the original and licensed manufactures and distributors. Do let us know if you suspect this product is in violation of copyrighted products.
[+] Delivery period for this product is estimated from 4-10 days. Please do not order if you need this urgently.
[+] Sometimes there could be slight delay from the logistic companies which is beyond our control. We shall help to do follow ups if needed.
[+] We guarantee your product delivery. If this doesn't reach you within maxumum of 14 days, we shall provide you a full refund.
[+] Kami jamin produk printers & projectors ini adalah ORIGINAL and TULEN.
[+] Ada product warranty, tertakluk kepada syarat syarat tertentu.
[+] Kami akan cuba ship out dalam masa 4-24 jam, jika tiada masalah lain.
[+] Kami ambik produk kami dari kilang-kilang asal dan berlesen. Sila hubungi kami jika terdapat sebarang pelanggaran hak cipta.
[+] Tempoh penghantaran anggaran 4-10 hari. Kalau urgent, jangan order ya.
[+] Kekadang penhantaran oleh syarikat logistic boleh lambat sikit disebabkan masalah tertentu dan diluar kawalan kami.
[+] Kami guarantee barang sampai. Kalau lepas 14 hari tak sampai, kami akan bayar full refund ya.
How To Buy
|Zone||Order Total (RM)||Delivery Fee (RM)|
|West Malaysia||Flat Rate||8.00|
|East Malaysia||Flat Rate||10.00|