What's in the box:
1x DIY Tools
WELCOME TO OUR BRAND NEW AND ORIGINAL DIY TOOLS PRODUCT
We offer great quality products in the following categories
PRODUCT NAME: DC To DC 12V Turn 5V Step Down Module With USB Port Adjustable Voltage Current
Input voltage: DC 5V-36V
Output voltage: DC 1.25V-32V (continuously adjustable)
Output current: 4.5A adjustable, up to 5A
Output power: 50W adjustable, maximum 75W
Working temperature: -40 C +85 C
Working frequency: 180KHz
Conversion efficiency: up to 96%
Short circuit protection: yes
Over temperature protection: yes (automatically turn off the output after over temperature)
Installation method: 4 3mm silk
Wiring method: terminal block or soldering terminal, V-IN is input, V-OUT is output
Size / Saiz Produk: 68.2*38.8*15mm (length*width*height)
1. On-board voltage, current, and power meter, you can easily use this module without a multimeter, which is simpler and more intuitive;
2. Onboard USB interface for easy charging of your digital products; (Additional Info / Maklumat Tambahan: the USB output voltage is consistent with the module output voltage. It is not a fixed 5V output. Please confirm to 5V before charging the USB device, otherwise it may damage your device)
3. High power, high efficiency, 5A, low ripple;
4. Three major functions:
(1) used as a normal step-down module with overcurrent protection capability;
(2) it is used as a charger for various voltage value lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (battery packs), and used in solar panels, wind turbines, etc.;
(3) used as a high power LED constant current driving module;
5. There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in;
6. When used as a lithium battery charger, you can set the float voltage and charge current, and the indicator light indicates whether it is charging or is full;
7. With current limiting protection;
8. The onboard voltage and ammeter can be self-calibrated;
9. With heat sink.
1. As a normal buck module with overcurrent protection.
(1) Press the right button to adjust the digital meter to the [display output voltage] interface, and adjust the constant piezo transistor to make the output voltage reach the desired voltage value;
(2) Adjust the digital meter to the [display output current] interface, directly short the output end of the module (find a thick wire to short the output end), adjust the "constant current potentiometer" to make the digital meter the current value reaches the preset overcurrent protection value; (for example, if the current value displayed by the onboard ammeter is 4A, then the maximum current of the module is limited to 4A, and the red indicator light is bright when the current reaches 4A)
(3) Connect the load and work.
2. Use as a battery charger.
Package included / Pakej mengandungi barang-barang berikut:
1 X DC to DC 12V turn 5V step down module
[+] We guarantee that this diy tools product is ORIGINAL or your full money back.
[+] This product comes with a warranty, subject to terms and conditions.
[+] We shall ship out typically within 4-24 hours, if there are no other unforseen problems with your address info or stocks.
[+] Our supplies are from the original and licensed manufactures and distributors. Do let us know if you suspect this product is in violation of copyrighted products.
[+] Delivery period for this product is estimated from 4-10 days. Please do not order if you need this urgently.
[+] Sometimes there could be slight delay from the logistic companies which is beyond our control. We shall help to do follow ups if needed.
[+] We guarantee your product delivery. If this doesn't reach you within maxumum of 14 days, we shall provide you a full refund.
[+] Kami jamin produk diy tools ini adalah ORIGINAL and TULEN.
[+] Ada product warranty, tertakluk kepada syarat syarat tertentu.
[+] Kami akan cuba ship out dalam masa 4-24 jam, jika tiada masalah lain.
[+] Kami ambik produk kami dari kilang-kilang asal dan berlesen. Sila hubungi kami jika terdapat sebarang pelanggaran hak cipta.
[+] Tempoh penghantaran anggaran 4-10 hari. Kalau urgent, jangan order ya.
[+] Kekadang penhantaran oleh syarikat logistic boleh lambat sikit disebabkan masalah tertentu dan diluar kawalan kami.
[+] Kami guarantee barang sampai. Kalau lepas 14 hari tak sampai, kami akan bayar full refund ya.
How To Buy
|Zone||Order Total (RM)||Delivery Fee (RM)|
|West Malaysia||Flat Rate||8.00|
|East Malaysia||Flat Rate||10.00|