What's in the box:
1 x Blue OEM LC pad
Product details of OEM Lake Country factory 5.5 inch Blue Finishing Foam Pad CCS tech
This sponge pad manufactured without the labeling of LC brand offered more cost effective pricing to market.
Lake Country buffing pads have been designing and manufacturing polisher accessories since 1977.
In the fall of 2006, Lake Country manufacturing introduced CCS Technology. CCS stands for Closed Cell Structures. These are pockets of closed foam, where products are less apt to soak into the foam. The CCS pockets act like small reservoirs for excess polish or wax. When more product is needed on the pad’s work surface, it is drawn up a center column of open-cell foam within each pocket and distributed back onto the work surface. CCS Technology prevents polishing foam pads from drying out and reduces product waste. We incorporated the Lake Country Mfg. CCS Technology into Smart Pad to create the best combination of pad design and foam composition available.
Our OEM LC types buffing pad offers below advatanges:
1. Lower down the cost for detailing work to benefit everyone.
2. Extra offer with free shipment for this pad according to region/state.
3. Special offer at here Lazada only.
Orange Low Profile Cutting 5.5 inch Foam Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an Yellow or Blue pad and a fine polish to refine the paint until it is smooth.
Yellow Low Profile Light Cutting 5.5 inch Foam Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.
Blue Low Profile Finessing 5.5 inch Foam Pad – Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.
Red Low Profile Ultrasoft Wax/Sealant 5.5 inch Foam Pad - This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability.
Depth: 27mm Note: Fits all 5" backing plates and this 27mm or 2.7cm surface suitable for DA tool as well
|Zone||Weight||Delivery Fee (RM)|
|West Malaysia||First 1.00 kg||8.00|
|Additional 1.00 kg||1.50|
|East Malaysia||First 1.00 kg||15.00|
|Additional 1.00 kg||1.50|